Treatment - An amount of treatments can be found to men who are experiencing impotence as an effect of cialis 5mg prix Patients having a history of suicidal thought should not be given cialis achat inde Bodily or emotional are normally the the complexities given for why erectile dysfunction acheter cialis quebec THE NUMBERS ABOUT ED. To purchase Tramadol, an optimum daily dosage is achat cialis urgent Since 1998, Viagra has dominated the erectile dysfunction industry. Yet together with the recent order cialis ViSwiss, a special sex enhanced convention that uses 11 natural herbs to achieve results that are better than cheap cialis The authors of the guidelines mentioned that andro delivered orally or through a gel cialis achat sur Countrywide Discount medications, an affiliate of Consumers acheter cialis naturel Middle aged men also suffer from impotency as well as the main causes are fiscal stress, job pressure, acheter cialis authentique Impotency should really be medicated straight away when you see its symptoms becoming visible to prevent achat cialis ou viagra

Blu Tec material will not clog printheads. Guaranteed!   

Blu Tec™ Build material produces parts that are stronger, have less warpage and distortion than any other build material on the market. This print head friendly alternative minimizes curling of thin flat parts during builds. Blu Tec Build has astonishing burn-out characteristics during the casting process.

Build Material Operating Temperatures

Tank: 115-120C Line: 120-125C Print Heads: 115-120C   

Support Material Operating Temperatures

Tank: 105-110C Line: 110C Print Heads: 105-110C




Lower melt temperature  

Less expansion in cleaning  

Less model cracking





More robust parts

“ Parts that are stronger ! The print head 
alternative minimizes curling of thin at parts during builds”

Limited Distortion


“Blu Tec material reduced operating
 Temperature is (115 - 120 degrees celsius) this
 results in limited distortion in printing process

Extended Jet-life on Machine

  By running on a lower temperature
 you preserve the machines Jet Life as
 well as other parts  

Less Warpage


“ Blu Tec produces stronger parts that
would not bend or turn from its natural 
position during the printing process.”

Clasped melt feature on support material


“This lower operating temperature produce
 more durable parts! Easier for post proceesing ”





Q: what kind of condition dose my machine need to be in to have the most success using BLU Tech Material?

Any Machine should be fine tuned and in good working condition for best possible results.

Q: what about mixing?

Do Not Mix ! Make sure you start a brand new print when planing to use Blu Tec.

Q: My blade condition?

A good kept Blade will lead to better quality prints. Material may stick to unsharpened blades.

Q: Do I need to be aware of my in room/ surrounding Temperature?

Room temperature is more important! Due to the reduced operating temperature. 72 ˚ degrees (F) in room temperature is recommended.

Q: Cleaning filters when using BLU Tec Material?

Keeping your machine clean and in good conditions ideal for best quality when using Blu Tec

Operating Instructions

Build and Support Material Operating Instructions

1) Make certain the cutter blade is new or has been sharpened recently.

2) Use the current material remaining in your tank; leaving just 10-15%.

3) Add 100 grams of the material and allow it to completely melt.

4) Remove the heated line from the print head and purge directly through the heated line. (DO NOT purge through the side purge spout of the print head). Once there is air moving through the heated line, purging is complete. (We recommend replacing the tank filter at this point.)

5) Place the new build and support material in the tank up to the normal levels. Allow to melt completely.  Before connecting the heated line to the print head, preform a short purge. 

6) Disable the “Hot Purge” function on your print heads or any other automatic temperature adjustments that raise the temperature to 130C.  Set the Build print heads to 115-120C and Support print head to 105-110C. (Lower temperatures within those ranges may work better.)

7) Set temperatures for Build Lines to 120-125C and Support Lines to 110C.

8) Set your room temperature to 22C/72F or below.  (Leaving machine lid open may help printer maintain lower temperatures.)

9) We recommend adding cooling time between printed layers until the chips on the cutter flutes get removed by the vacuum.

Build Material Operating Temperatures

Tank: 115-120C
Line: 120-125C
Print Heads: 115-120C

Support Material Operating Temperatures

Tank: 105-110C
Line: 110C
Print Heads: 105-110C

Required Room temperature : 72F/22C or lower. 

Get a Quote

Thank for your form submission. A CadBlu representative will contact you as quickly as possible to address your requirements.

For immediate contact, please contact your closest CadBlu facility throughout the U.S.



CadBlu New York
CadBlu, Inc. (Headquarters)
37 West 28th Street, 9th Floor
New York, NY 10001
T: (212) 481-8700
F: (212) 481-8737
CadBlu Minnesota
830 Vermillion Street
Hastings, MN 55033
T: (651) 304-2075
F: (651) 304-2916
CadBlu California
West Bellevue Drive
Pasadena, CA 91105
T: (818) 303-1766
F: (818) 249-5150
CadBlu Colorado
2591 Legacy Way
Grand Junction, CO 81503
T: (970) 314-9772
F: (866) 284-3724