Build larger parts. Build small parts. Build more parts! The largest build size available in High-Definition 3-D Printing!
Superior Part Quality & Accuracy
Scalable, Modular Material Management
Thermal Controlled Multi-jet Modeling (MJM) Technology
Tough Durable Hard Plastic
Low Maintenance Requirements
Factory Capability with Office Functionality
Powerful ProJet™ Accelerator Software
|
|
|
Enormous Build Volume:
- 550 x 393 x 300 mm (21.65 x 15.5 x 11.8 inches)
- Largest build size available in High Definition 3-D Printing
- Builds more parts per build than any other High Definition 3-D Printer
- Fully utilize entire build volume to maximize part building capacity
- Part stacking and nesting
- Nest additional parts to increase output without adding time
- Wide-pass print head reduces number of printing passes to a maximum of 2 for largest parts
- Wide-pass print head offers maximum throughput for capacity builds
- Build larger parts, Build small parts, Build more parts!
Superior Part Quality:
- Superior surface smoothness
- Crisp, fine details
- Clean definition lines and lettering
- Sharp edges and corners
- No stair-stepping on curved surfaces
- No geometry limitations
- Durable, stable hard plastic
- Accuracy and precision
Scalable Material Management:
- Configure your system to match your specific requirements
- Configurable Material Delivery Modules (MDMs) are user installable
- Each MDM holds one 2.0kg material bottle
- Add up to 8 MDMs
- Largest material capacity in the industry (more than 11% larger than Eden 500V)
- Up to 80+ hours unattended operation capability
Thermal Controlled Multi-jet Modeling (MJM) Technology:
- Proven performance & reliability
- Superior print control
- High precision jetting
- Print droplets “freeze” on contact
- No uncontrolled flowing or creeping
- No splatter on contact
- Uses less support material than liquid photopolymer systems (e.g. Objet)
- Minimum vertical wall thicknesses down to 0.25mm (0.010 inches)
- Small features down to 0.05mm (0.002 inches)
|
VisiJet® MX Tough Durable Hard Plastic:
-
True plastic Feel, Fit and Function
-
Accurate & precise
-
Stable properties under varying conditions
-
Heat stable
-
Moisture stable
-
Durable for demanding applications
-
Sharp feature detail
-
Transparency for increased visibility of internal geometry
VisiJet® S300 Melt-Away Support Wax:
-
Formulated for efficient removal without damage to delicate features
-
Enables high-quality support-side surfaces and features with no support scars
-
Hands-free removal
-
Wax simply melts away
-
Easily removed from the most delicate part features
-
Easily removed from all internal cavities and complex geometries
-
Requires no pressurized water-jet action
-
Does not require build material mixing to provide adequate support
-
Inert wax may be handled with no special precautions
-
Wax is non-hazardous and may be disposed with ordinary trash
Material Economy:
-
Uses less material than parts produced on other large-format 3-D printers
-
No mixing of more expensive build material with the support material
-
Reduces material consumption
-
Reduces material waste
-
Reduces cost
Low Maintenance Requirements:
-
Automatic head cleaning system – no operator maintenance required
-
Auto-purge & wipe
-
Automatic print head preparation for building
-
Long-life Print Head
-
Single rugged print head designed for years of 24/7 operation
-
Standard 5 year Print Head Warranty included
-
No user calibration required for consistent accuracy and part quality
-
No-lube design for years of operation
Factory Capability, Office Functionality:
-
Engineered for 24/7 operation
-
Designed for the office
-
Safe, clean, quiet operation
-
Attractive exterior design
-
Small footprint
-
Produces environmentally stable, fully cured parts
-
Build and support materials provided in clean, easy-to-install, no leak bottles requiring no contact
-
Inert wax support material can be disposed in normal trash
-
Network ready
|
IMAGE GALLERY
ProJet 5000 demonstration from Euromold 2009!
VisiJet® Materials for ProJet™ 5000 3-D Printers
Click on the links below for more information about these materials:
VisiJet® MX Build Plastic - 2.0kg bottle
VisiJet® S300 Support Wax - 2.0kg bottle
Compare material specifications for all 3D Systems' ProJet 3D printer
